/*
 * user_oled.h
 *
 *  Created on: 2023年11月1日
 *      Author: wyf
 */

#ifndef USER_INC_USER_OLED_H_
#define USER_INC_USER_OLED_H_

#define OLED_MODE 0
#define SIZE 8
#define XLevelL		0x00
#define XLevelH		0x10
#define Max_Column	128
#define Max_Row		64
#define	Brightness	0xFF
#define X_WIDTH 	128
#define Y_WIDTH 	64
//-----------------OLED IIC端口定义----------------

#define OLED_SCLK_Clr() HAL_GPIO_WritePin(IIC_SCL_GPIO_Port, IIC_SCL_Pin, GPIO_PIN_RESET)
#define OLED_SCLK_Set() HAL_GPIO_WritePin(IIC_SCL_GPIO_Port, IIC_SCL_Pin, GPIO_PIN_SET)

#define OLED_SDIN_Clr() HAL_GPIO_WritePin(IIC_SDA_GPIO_Port, IIC_SDA_Pin, GPIO_PIN_RESET)
#define OLED_SDIN_Set() HAL_GPIO_WritePin(IIC_SDA_GPIO_Port, IIC_SDA_Pin, GPIO_PIN_SET)



#define OLED_CMD  0	//写命令
#define OLED_DATA 1	//写数据


//OLED控制用函数
void OLED_WR_Byte(unsigned dat,unsigned cmd);
void OLED_Display_On(void);
void OLED_Display_Off(void);
void OLED_Init(void);
void OLED_Clear(void);
void OLED_DrawPoint(uint8_t x,uint8_t y,uint8_t t);
void OLED_Fill(uint8_t x1,uint8_t y1,uint8_t x2,uint8_t y2,uint8_t dot);
void OLED_ShowChar(uint8_t x,uint8_t y,uint8_t chr,uint8_t Char_Size);
void OLED_ShowNum(uint8_t x,uint8_t y,uint32_t num,uint8_t len,uint8_t size);
void OLED_ShowString(uint8_t x,uint8_t y, uint8_t *p,uint8_t Char_Size);
void OLED_Set_Pos(unsigned char x, unsigned char y);
void OLED_ShowCHinese(uint8_t x,uint8_t y,uint8_t no);
void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[]);
void Delay_50ms(unsigned int Del_50ms);
void Delay_1ms(unsigned int Del_1ms);
void fill_picture(unsigned char fill_Data);
void Picture(void);
void IIC_Start(void);
void IIC_Stop(void);
void Write_IIC_Command(unsigned char IIC_Command);
void Write_IIC_Data(unsigned char IIC_Data);
void Write_IIC_Byte(unsigned char IIC_Byte);

void IIC_Wait_Ack(void);



#endif /* USER_INC_USER_OLED_H_ */