58 lines
1.7 KiB
C
58 lines
1.7 KiB
C
/*
|
||
* user.h
|
||
*
|
||
* Created on: 2023年1月29日
|
||
* Author: wyf
|
||
*/
|
||
|
||
#ifndef INC_USER_H_
|
||
#define INC_USER_H_
|
||
|
||
#include "main.h"
|
||
#include "user_stick.h"
|
||
#include "usart.h"
|
||
#include "dma.h"
|
||
|
||
#include "string.h"
|
||
#include "math.h"
|
||
#include "stdlib.h"
|
||
|
||
#define ENABLE_INT() __set_PRIMASK(0) /* 使能全局中断 */
|
||
#define DISABLE_INT() __set_PRIMASK(1) /* 禁止全局中断 */
|
||
|
||
extern DMA_HandleTypeDef hdma_adc;
|
||
extern ADC_HandleTypeDef hadc;
|
||
extern TIM_HandleTypeDef htim14;
|
||
extern DMA_HandleTypeDef hdma_usart1_rx;
|
||
extern DMA_HandleTypeDef hdma_usart1_tx;
|
||
extern UART_HandleTypeDef huart1;
|
||
|
||
|
||
#define FLASH485_ADDR 0x08003C00 //存放485地址的地址
|
||
#define BUFF_LEN 32
|
||
#define ADCBUFF_LEN 250
|
||
|
||
|
||
extern uint16_t RS485ADDR; //485地址
|
||
extern uint16_t RegularConvData_Tab[ADCBUFF_LEN]; //ADC采集原始数据
|
||
extern int16_t adc_max ,adc1_max ; //最终峰峰值和
|
||
extern int16_t adc_positive, adc_negative;
|
||
extern uint8_t usart_count ; //串口接收数据个数
|
||
extern uint16_t pwm_pulse ; //pwm波脉宽
|
||
extern int16_t adcValue_factor ; //adc测量值得修正系数*10
|
||
extern uint8_t RxBuff[BUFF_LEN]; //串口接收缓冲区
|
||
extern uint8_t TXBuff[BUFF_LEN]; //串口发送缓冲区
|
||
extern uint8_t uBuff[BUFF_LEN]; //用户缓冲区
|
||
extern int8_t polarity,adc_state; //电场极性，投退状态
|
||
extern uint8_t electric_flag; //外加的反向电场极限，0为负，1为正
|
||
|
||
extern uint16_t estimate_value ; //投退判断的差值
|
||
|
||
void ADC_MAX(void);
|
||
void Usart_Receive(void);
|
||
void send_ack(uint8_t a);
|
||
void MODBUS_03H(void);
|
||
void MODBUS_06H(void);
|
||
uint8_t write_flash(void);
|
||
#endif /* INC_USER_H_ */
|