/*
 * user.h
 *
 *  Created on: Nov 11, 2024
 *      Author: 10425
 */

#ifndef INC_USER_H_
#define INC_USER_H_

#include "main.h"
#include "adc.h"
#include "dma.h"
#include "i2c.h"
#include "tim.h"
#include "usart.h"
#include "gpio.h"
#include "iwdg.h"

#include "AHT20.h"
#include "AT24C16.h"
#include "user_stick.h"
#include "string.h"
#include "math.h"
#include "stdlib.h"

#define	BUFF_LEN  		128
#define ADCBUFF_LEN		300

#define ENABLE_INT()	__set_PRIMASK(0)	/* 使能全局中断 */
#define DISABLE_INT()	__set_PRIMASK(1)	/* 禁止全局中断 */


extern volatile uint8_t  	usart1_count ;						//串口接收数据个数
extern uint8_t 		  		RxBuff1[BUFF_LEN];					//串口接收缓冲区
extern uint8_t  		  	TXBuff1[BUFF_LEN];					//串口发送缓冲区
extern uint8_t	 			uBuff1[BUFF_LEN];

extern volatile uint8_t  	usart3_count ;						//串口接收数据个数
extern uint8_t 		  		RxBuff3[BUFF_LEN];					//串口接收缓冲区
extern uint8_t  		  	TXBuff3[BUFF_LEN];					//串口发送缓冲区
extern uint8_t	 			uBuff3[BUFF_LEN];

extern uint16_t RegularConvData_Tab[ADCBUFF_LEN];

struct REGISTER
{

	int16_t addr;
	int16_t version;			//版本信息
	int16_t electric_X;			//电场强度
	int16_t	electric_Y;
	int16_t	electric_Z;
	int16_t	electric_V;

	int16_t	magnetic_X;			//磁场强度
	int16_t	magnetic_Y;
	int16_t	magnetic_Z;
	int16_t	magnetic_V;

	int16_t tempe;
	int16_t humidness;			//温湿度

	int16_t REF;				//参考电压
};
extern	volatile struct REGISTER dev_reg;

void user_main();
void ADC_MAX(void);
void send_data(UART_HandleTypeDef*huart,uint8_t* data,uint16_t len);
void Usart_Receive();
void MODBUS_03H();
void send_UI(uint8_t a);
void MODBUS_10H();
void change_addr();
#endif /* INC_USER_H_ */