/*
 * user_main.h
 *
 *  Created on: Nov 11, 2024
 *      Author: 10425
 */

#include "user.h"

void user_main()
{
	uint8_t parameters[2];
	//开始空闲中断
	__HAL_UART_ENABLE_IT(&huart1,UART_IT_IDLE);
	__HAL_UART_CLEAR_IT(&huart1,UART_CLEAR_IDLEF|UART_CLEAR_TCF);

	__HAL_UART_ENABLE_IT(&huart3,UART_IT_IDLE);
	__HAL_UART_CLEAR_IT(&huart3,UART_CLEAR_IDLEF|UART_CLEAR_TCF);

	bsp_InitTimer();
	AHT20_Init(&SENx,2000,0x38);
	AT24C16_Init();

	HAL_UART_DMAStop(&huart1);//复位DMA					//串口DMA接受
	HAL_UART_Receive_DMA(&huart1,(uint8_t *)RxBuff1,sizeof(RxBuff1));

	HAL_UART_DMAStop(&huart3);//复位DMA					//串口DMA接受
	HAL_UART_Receive_DMA(&huart3,(uint8_t *)RxBuff3,sizeof(RxBuff3));

	HAL_ADC_Start_DMA(&hadc1, (uint32_t*)RegularConvData_Tab, ADCBUFF_LEN);	//开启ADC转换

	//DE发射器使能，高电平有效，RE接收器使能，低电平有效
	HAL_GPIO_WritePin(TXEN_485_GPIO_Port, TXEN_485_Pin, GPIO_PIN_RESET);

	//读取硬件参数
	dev_reg.version = 100;
	HAL_StatusTypeDef status;
	status=AT24C16_ReadBytes(0, parameters, sizeof(parameters));
	if(status == HAL_OK)
	{
		dev_reg.addr = parameters[0]<<8| parameters[1];
		if(dev_reg.addr == -1 || dev_reg.addr ==0 )
		{
			dev_reg.addr =1;
		}
	}

//	HAL_Delay(2000);
//	send_UI(8);
//	HAL_Delay(200);

	bsp_StartAutoTimer(0, 500);
	bsp_StartAutoTimer(1, 80);
	bsp_StartAutoTimer(2,MYI2C_Tick); //计算温湿度
	while(1)
	{
		if(bsp_CheckTimer(0))
		{
			HAL_IWDG_Refresh(&hiwdg);
			HAL_GPIO_TogglePin(LED1_GPIO_Port, LED1_Pin);

		}
		if(bsp_CheckTimer(1))
		{
			ADC_MAX();

		}
		if(bsp_CheckTimer(2))
		{
			AHT20_Handle(&SENx);
			if(SENx.Step == SENSOR_COMPLETE)
			{
				dev_reg.humidness = (int16_t)(SENx.RH*100);
				dev_reg.tempe	  = (int16_t)(SENx.T*100);
			}
		}
		if(usart1_count >0)
		{
			  Usart_Receive();
			  usart1_count = 0;
		}
		if(usart3_count >0)
		{
			HAL_GPIO_WritePin(LED2_GPIO_Port, LED2_Pin, GPIO_PIN_RESET);
			Usart_Receive();
			usart3_count = 0;
			HAL_GPIO_WritePin(LED2_GPIO_Port, LED2_Pin, GPIO_PIN_SET);
		}



	}
}